![]() When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click.You can use diluted coolant by itself or a 50/50 mixture of concentrated coolant and distilled water. If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself).Loosen the reservoir cap just a little, then step back while the pressure releases.If your engine is cold, the coolant level should be up to the cold fill line. The reservoir has a fill range marked on the side.It is often a translucent white color, and has hose(s) connecting it to the radiator. ![]() Open the hood and locate the engine coolant reservoir.Make sure your engine is off and cool, the vehicle is in Park or Neutral, and the parking brake is set.Put a towel or a thick cloth on the reservoir cap before removing it, as the cap is under pressure.Never remove the coolant reservoir cap when the engine is running or still hot.Fans can turn on automatically, even when the engine is off. Roll up or remove loose clothing, and keep your arms away from the cooling fan(s).Locate or buy a gallon of the correct coolant.Check the owner’s manual to find your vehicle’s correct engine coolant-different engine types require different coolants. NOTE: YOU SHOULD NEVER MIX COOLANT TYPES, AS THIS CAN POTENTIALLY CAUSE ENGINE DAMAGE.There are a few things you should do before starting: And if you ever need to add coolant, here’s how to do it. You should check your vehicle’s coolant level every time you fill up the fuel tank. And that’s where engine coolant comes in.Ĭoolant circulates through the engine and absorbs heat, helping keep the engine at the right operating temperature.Ĭoolant also helps keep your engine working as efficiently as possible, helps keep its emissions low, and even helps provide that toasty heater air on cold days. When your engine is running, it makes power-but it also makes heat.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |